DJI Matrice 400

17-Litre Transport Box for DJI Matrice 400

The 17-Litre Transport Box is the dedicated cargo compartment for the DJI Matrice 400, with 17 litres of capacity and up to 2 kg of payload in a 404 × 304 × 344 mm body of aluminium alloy and EPP weighing around 1,6 kg. The moulded profile does not obstruct the downward infrared sensors, integration is native to DJI transport mode over PSDK, and the system includes a safety switch, a voice alert for ground personnel and a red-and-blue warning light with seven selectable modes.

Box di Trasporto da 17 Litri per DJI Matrice 400
1.451,80 € TAX (22%) Included
Invoicing available at check-out
Yours from 32,11 €/month with Grenke Operating Lease
VAT-FREE
Tax-Free Shopping For EU businesses registered in VIES
↗
Talk to an expert Dedicated technical consultant — Mon–Fri 9:00 AM–6:00 PM
Call
Register now → ACCESS DISCOUNTS
Register now and get exclusive discounts on all products. Reserved prices are visible only to registered users.
Access the Reserved Pricing
Aerial transport · DroneBase17-Litre Transport Box for DJI Matrice 400

Dedicated cargo compartment for the DJI Matrice 400, with 17 litres of capacity and 2 kg of payload, in aluminium alloy and EPP. The profile is moulded so it does not obstruct the downward infrared sensors, integration is native to DJI’s transport mode over PSDK, and the system includes a safety switch, a voice alert for ground personnel and a red-and-blue warning light with seven modes.

17 lCargo Capacity 2 kgPayload per Box 1,6 kgBox Weight 7Light Modes
ProductSeventeen litres under the Matrice 400, without giving up obstacle sensing

The 17-Litre Transport Box is a cargo compartment designed around the DJI Matrice 400. It is not a generic container bolted under an aircraft: the profile is moulded to the machine and leaves the downward infrared sensors clear, which on an industrial drone are part of the obstacle sensing system rather than an optional extra. That is the difference between adding carrying capacity and subtracting flight safety.

Capacity is approximately 17 litres, enough for materials, tools and daily supplies, with a stated payload of up to 2 kg per box. The body measures 404 × 304 × 344 mm, is built in aluminium alloy and EPP and weighs around 1,6 kg: a mass that barely eats into the aircraft’s remaining capacity and therefore its mission endurance. The documentation also quotes 2,2 kg for the main unit: for load-budget calculations it is safer to work with the higher figure and confirm the actual configuration at installation.

Integration with the aircraft is native to DJI’s transport mode. The carrying module connects to the payload port through a PSDK cable and is operated from DJI Pilot 2, with real-time flight status monitoring. Control covers three distinct elements: a safety switch that must be enabled before any function becomes available, a voice alert that tells ground personnel to keep clear, and a red-and-blue warning light with seven selectable modes.

Mounting is by bolts, on the underside of the aircraft, using the landing-gear adapter bracket supplied in the box. The landing-gear structure is reworked to make loading and opening the compartment easier. Installation is a structured job — it requires removing the original landing gear and the onboard gimbal — so this is a configuration prepared in the workshop, not an accessory to fit in the field between two missions. Supplied by DroneBase, ISO 9001:2015 certified company, with use-case assessment, installation, commissioning, operator training and specialised technical support.

Features and safetyWhat comes besides the compartment

A transport box flying over people and work areas needs more than a hinge: control here covers three levels of signalling.

Safety switchIt must be enabled before any function is available: no accidental opening of the compartment
Voice alert on the groundTells ground personnel to keep clear: the warning arrives before the aircraft does
Seven light modesRed-and-blue warning light with seven modes the operator selects to suit the scene
Infrared sensors left clearThe moulded profile does not obstruct the downward sensors: the aircraft’s obstacle sensing stays operational
Reworked landing gearThe optimised structure makes loading and opening the compartment easier than a generic mount would
Native PSDK integrationConnects to the DJI payload port and is operated from DJI Pilot 2, with real-time flight status monitoring
InstallationHow it mounts to the aircraft

This is a workshop configuration, not a quick-release accessory: plan for it.

Bolt fastening
Mounted on the underside of the aircraft, using the landing-gear adapter bracket supplied
Requires removing the original landing gear
Installation also involves removing the onboard gimbal: a structured job to be planned
Control module
The supplied control box connects to the aircraft’s payload port through a PSDK cable
Operated from DJI Pilot 2
The box’s functions are managed from the flight app’s PSDK interface
Aluminium alloy and EPP
Metal load-bearing structure and expanded polypropylene body, to keep the mass down
One-year warranty
Free repair for twelve months from the date of purchase, under the product’s warranty terms
Technical specificationsFull technical specifications
DIMENSIONS AND WEIGHT
Dimensions404 × 304 × 344 mm
CapacityApproximately 17 l
Box weightApproximately 1,6 kg
Main unit weight2,2 kg as stated; the higher figure is recommended for load-budget calculations
PayloadUp to 2 kg per box, subject to the aircraft’s carrying capacity
MaterialsAluminium alloy and EPP
INSTALLATION
Fastening methodBolts
Installation locationUnderside of the aircraft
BracketLanding-gear adapter supplied; installation requires removing the original landing gear and the onboard gimbal
Electrical connectionPSDK cable from the control module to the DJI payload port
FUNCTIONS AND CONTROL
Control interfacePSDK, from DJI Pilot 2, with real-time flight status monitoring
Safety switchMust be enabled before any function is used
Audible warningVoice alert to ground personnel
Light signallingRed-and-blue light with seven selectable modes
Aircraft sensorsMoulded profile that does not obstruct the downward infrared sensors
COMPATIBILITY AND WARRANTY
Compatible aircraftDJI Matrice 400
WarrantyFree repair for one year from the date of purchase, under the product’s warranty terms
In the boxWhat the supply includes
Transport box × 1
With foot pads already installed
Control module × 1
Control box for connection to the payload port
Landing-gear adapter bracket × 1
Replaces the aircraft’s original landing gear
Screws
In the quantities required for mounting

Not included: the DJI Matrice 400 aircraft.

Who it is forApplication sectors
Curtain-wall cleaningCarrying materials and equipment to working positions at height, without a hoist
Emergency rescueDelivering supplies to isolated people, where ground access takes longer than the situation allows
Power line inspectionCarrying tools and spares to crews on pylons, so they do not have to climb with the load
Aerial logisticsRecurring deliveries over short routes, where a road vehicle would take longer than a direct flight
Construction sitesMaterials and tools to the upper floors of buildings under construction, without tying up the crane
Plant maintenanceResupplying components to intervention points far from the site stores
Frequently asked questionsFAQ
Which aircraft does it fit?
It is designed for the DJI Matrice 400, with a profile moulded to that machine. Mounting is by bolts on the underside, using the landing-gear adapter bracket supplied.
Can it be fitted and removed quickly?
No. Installation requires removing the original landing gear and the onboard gimbal, fitting the adapter bracket and connecting the PSDK cable to the payload port. This is a configuration prepared in the workshop, not an accessory to swap in the field between missions.
How much does it weigh and what payload is left?
The box weighs around 1,6 kg and the documentation quotes 2,2 kg for the main unit: for load-budget purposes it is safer to use the higher figure. Stated payload is up to 2 kg per box, and remains subject to the aircraft’s remaining capacity under real flight conditions.
Does it block the aircraft’s sensors?
No. The profile is moulded to leave the downward infrared sensors clear, so the aircraft’s obstacle sensing stays operational with the box fitted.
How is it opened and controlled?
Functions are managed from the PSDK interface in DJI Pilot 2. The safety switch must be enabled before any operation; the voice alert for ground personnel and the red-and-blue warning light, with seven selectable modes, are then available.
What is the voice alert for?
It tells ground personnel to keep clear during loading and unloading. On a construction site or a busy work area, an audible warning reaches people before they notice the aircraft.
What is in the box?
One transport box with foot pads already installed, one control module, one landing-gear adapter bracket and the screws needed for mounting. The aircraft is not included.
What warranty does it carry?
Free repair for one year from the date of purchase, under the product’s warranty terms. Excluded are failures caused by misuse, by unauthorised disassembly or repair, and shipping damage caused by not using the original packaging.
What support does DroneBase provide?
DroneBase supports the supply with use-case assessment, installation and commissioning, operator training, ENAC/EASA SORA and PDRA consultancy and specialised technical support.
17-Litre Transport Box for DJI Matrice 400 — Available at DroneBase

17 litres of capacity and up to 2 kg of payload, in a 1,6 kg box · Infrared sensors left clear · Safety switch, voice alert and seven light modes · Native PSDK integration · Bracket and screws included

ISO 9001:2015PSDKDJI Matrice 4001-year warranty

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “17-Litre Transport Box for DJI Matrice 400”

There are no reviews yet.

Why DroneBase

The partner that neverleaves you grounded.

01 — Warranty
Official DJI Warranty
12-month full warranty on original product. Certified purchase from a DJI Gold 5 dealer.
02 — Logistics
24h Express Shipping
Orders placed by 1:00 PM ship the same day. Trackable throughout Italy. Professional packaging.
03 — Support
Dedicated Technical Support
Certified consultant assigned to your account. Unlimited pre- and post-sales support.
04 — Purchase
Free 14-Day Returns
Satisfied or refunded within 14 days of delivery. No-questions-asked policy, full refund.
Tax Incentives 2026

Buy professional drones.Recover up to 60% of your investment.

In 2026, stackable tax tools are active that significantly reduce the effective cost. Available for companies, self-employed professionals and public administration.

01 — Transition 4.0 Plan
Hyper Depreciation
Enhanced tax deduction for technologically advanced capital goods. Directly reduces the IRES/IRPEF taxable base.
+180% deduction up to €2.5M
Learn how it works →
02 — Italian Law Decree 69/2013
Nuova Sabatini
Non-repayable interest contribution on financing or leasing. Reduces credit costs to nearly zero.
Non-repayable grant Active until 2029
Check requirements →
03 — Stackability
Stackable Savings
The two instruments operate on separate levels and can be combined. On a €20,000 enterprise system you can recover up to €10,000–12,000.
50–60% recovery Stackable 2026
Request a simulation →
Technical 4.0 documentation support included. DroneBase assists you with the technical appraisal and interconnection requirements needed to access Hyper Depreciation.
Tax incentive details →
Grenke Leasing
Choose the GrenkeOperating Lease!
  1. 1Add the product to your cart
  2. 2Select Operating Lease as the purchase method
  3. 3Select the monthly payment based on your preferred term (24–60 months)
  4. 4Submit your non-binding request
  5. 5Response within 48h
Discover why leasing makes sense →

Questions about this product?

Fill out the form and one of our experts will get back to you shortly.

Request Information

Option
Privacy Policy
Newsletter

Stay up to date

DJI product news, exclusive offers and tutorials from our experts.

Certified DJI Gold Dealer and ISO 9001:2015. Enterprise drone solutions for Italian professionals.

DroneBase SRL
Via San Giovenale 86
47922 Rimini — Italy
P.IVA IT04456990409 · REA RN-413198
ISO 9001:2015 Certified
DJI Gold Dealer ★★★★★
Trustpilot 4.8/5 Based on real reviews

© 2026 DroneBase SRL — All rights reserved · P.IVA IT04456990409

Visa, Mastercard, PayPal, Bank transfer, GrenkeLeasing