Cleaning without scaffolding
Professional height-cleaning system mounted on the DJI Matrice 400. Up to 80 m in height, 220 bar of pressure, just two operators on the ground. +300% efficiency, −40% operating costs. Zero scaffolding, zero work-at-height risks, no interruption to the activity below. Book a demo and let's assess your site together.
Scaffolding costs you
before you even start
Days of assembly, operators working at height, building activities halted, high insurance costs. The Drone Cleaning System moves everything to the ground: same result, a completely different job economics. The figures below come from real sites run by our clients on façades, photovoltaics and industrial buildings.
Traditional methods
- Costly scaffolding, long assembly times (hours or days)
- Operators at height: risk of falls and injuries
- Building activities interrupted during the job
- Limitations on complex geometries and overhangs
- High costs for difficult access (aerial ladders, MEWPs, rope access)
- Weather conditions limiting for those working at height
- Prolonged visual and logistical impact
- High operating liability insurance costs due to risk
Drone Cleaning System
- Setup in under 5 minutes, zero scaffolding
- Operators always on the ground: risk drastically reduced
- No interruption to the activities below
- Unlimited access to any geometry up to 80 m
- Operating cost cut by 40% on the same surface area
- Operable in more conditions than work at height
- Fast job, minimal footprint, low impact
- Lower risk exposure = lower insurance costs
From setup
to operation in 4 steps
The drone is equipped with a remotely controllable tilting lance, connected via a high-pressure hose to a pump positioned on the ground. The entire process is run from the pilot's station: one flight operator, a second managing the pump and hose reel. No downtime, no operators at height.
Plug & play mounting
Tool-free slide-on mount on the DJI Matrice 400. The cleaning system attaches in under 5 minutes, with a foldable design for compact transport and rapid deployment on site.
Industrial pump on the ground
Professional 220 bar petrol pump generating constant pressure delivered through 150 m of HP hose with a motorised electric hose reel. 660 l/h flow rate for continuous operation.
Remotely tilting lance
Spray angle adjustable from +10° to -50° with real-time remote control. Interchangeable ¼" nozzles to adapt the jet to any surface type and kind of dirt.
Live View & control
Dual Full HD camera with a laser sensor for precise distance from the surface. Everything monitored from the ground in complete safety: pilot and operator never leave the operating base.
Real results,
real clients
Four documented jobs on real structures: Bocconi University on complex glazed façades in full activity, a demonstration of HP jet power including drone cleaning of photovoltaic panels, glass cleaning with osmotic water and no streaks, application of biocides and pest-control products at height. Want to see it live? A working demo at our Rimini premises or directly on your own site.
Want to see the system in action on your building?
Exclusive technology,
not replicable
The Drone Cleaning System integrates advanced features that boost safety, precision and productivity during professional cleaning operations — and it's the only DJI-certified system on the market.
LiDAR and vision sensors
Thanks to full integration with the LiDAR system and vision sensors of the DJI Matrice 400, the drone automatically detects obstacles and maintains a constant, preset distance from the surface being treated. It reduces the risk of collisions, improves work quality and increases operational safety, especially when paired with professional propeller guards.
- Minimum distance adjustable down to 1 metre
- Automatic distance keeping
- Reduced risk of collisions
- More uniform and precise cleaning
- Greater operational safety
More uniform cleaning
The new Cruise Control function lets you set the drone's maximum speed in each direction of movement. The operator no longer has to control the sticks to the millimetre, greatly reducing stress and ensuring smoother, more regular passes.
- Greater flight precision
- Uniform coverage of detergent and rinse
- Less waste of water and chemicals
- Better final result quality
- Greater operating comfort for the pilot
The only DJI-certified Cleaning System
It is currently the only DJI-certified aerial cleaning system, fully controllable via the original DJI RC Plus / RC Plus 2 remote, with no additional control units or extra radio controllers.
- Maximum operational reliability
- Native DJI user experience
- Greater safety
- Reduced complexity for the operator
- Full support of the DJI ecosystem
More safety. More precision. More productivity.
The future of professional drone cleaning is already available today.
What changes
compared to scaffolding
The Drone Cleaning System isn't a "technological" alternative to traditional methods — it changes the economics of the job. Setup in minutes versus days of scaffolding assembly, operators always on the ground, access to otherwise unreachable geometries, no interruption to building activities. The average result is +300% efficiency and −40% operating costs.
Ready from the first arrival
Tool-free plug & play slide-on mount on the DJI Matrice 400. The 220 bar pump is positioned and connected on site, the hose reel unwound, the drone attached. In under 5 minutes the system is operational. By comparison: scaffolding requires hours or days of assembly, permits and logistics.
Operators always on the ground
The entire job is carried out from the ground: the pilot controls the drone, the second operator manages the pump and hose reel. No scaffolding, no aerial platforms, no operators at height. A drastic reduction in injury risk and operating liability insurance costs.
Access anywhere, up to 80 m
Vertical, inclined and curved façades, overhangs, balconies, solar panels on complex roofs: the drone reaches areas scaffolding and platforms can't. Maximum operating height 80 m, uniform coverage thanks to the remotely controlled tilting lance from +10° to -50°.
The building stays operational
The activities below are never interrupted: no closed roads, no blocked entrances, no shops shut down. The job is fast and quiet, with a minimal footprint on the ground. A key difference for shopping centres, hotels, offices, occupied residential buildings and public buildings.
Three configurations,
one tailored solution
Whether you already own a DJI Matrice 350/400 or are looking for a complete turnkey solution, there are three tiers designed to maximise safety, productivity and return on investment. During the demo we work out together which one is right for your sites. From the practical DCS Starter, to the most requested DCS Professional, up to the DCS Unlimited with tethered power supply and continuous operation for up to 12 hours. Prices exclude VAT. Operating lease and financing from 24 to 60 months available.
DCS Starter
Ideal for companies that already own a drone (DJI Matrice 350/400) and want to enter the drone-cleaning market with a contained investment. Everything needed to turn a compatible drone into a professional platform for aerial washing of façades, glazing, roofs and photovoltaic systems.
€11,900+ VAT or from €280/month · Grenke- 1× Cleaning System for DJI Matrice 400
- 1× Transport case for cleaning system
- 1× 220 bar pressure washer (660 l/h)
- 1× 150 m electric hose reel
- 1× Nozzle set 0° / 15° / 25° / 45° / 65°
- 1× Foam nozzle
- 1× 360° rotary turbo nozzle
- 1× 100 L collapsible tank
- 2× High-pressure hoses 10 m
- 1× High-pressure adapter set
- 3× Low-pressure hoses
- 1× Low-pressure fitting set
- 1× DJI Matrice 400 propeller guard set
- Drone not included
DCS Professional
The most requested configuration. Ideal for cleaning companies, maintenance firms and facility managers who want a complete solution ready to use from day one. Includes drone, cleaning system, batteries and training to start working and generating revenue right away.
€25,300+ VAT or from €530/month · Grenke- Everything in the DCS Starter, plus:
- 1× DJI Matrice 400 drone
- 3× Standard drone batteries
- 1× Drone charging station
- 1× Full system configuration and testing
- 1× 4-hour private operational training
- 1× Dedicated specialist technical support
- 1× ENAC Operator Manual
- 1× D-Flight registration*
DCS Unlimited
The ultimate solution for professional drone cleaning. Ideal for operators who need maximum productivity and continuous operation on large surfaces and intensive sites. Tethered power supply from the ground, virtually unlimited endurance and non-stop operation with no battery-swap pauses.
€34,100+ VAT or from €720/month · Grenke- Everything in the DCS Starter, plus:
- 1× DJI Matrice 400 drone
- 1× Standard drone battery
- 1× Drone charging station
- 1× Tethered drone battery
- 1× DJI Matrice 400 Tethered System**
- 1× Full system configuration and testing
- 1× 4-hour private operational training
- 1× Dedicated specialist technical support
- 1× D-Flight registration*
* D-Flight registration. Allows you to operate the drone in compliance with Italian regulations, obtain the identifying QR Code to apply to the aircraft and consult the official airspace maps to check for any flight limitations or restrictions. An essential requirement for flying legally and safely.
** Why Tethered pays off. Recover up to 28 operating hours per month and pay back the higher investment in just a few weeks of work (see the "Unlimited endurance. Zero interruptions." section).
Unlimited endurance.
Zero interruptions.
With a traditional battery configuration, an 8-hour working day requires on average up to 12 battery swaps. Between landing, replacing, taking off and repositioning the drone, you can lose up to 84 minutes of operation every day. The DCS Unlimited eliminates these interruptions entirely thanks to continuous tethered power, allowing up to 12 hours of uninterrupted work and recovering up to 28 operating hours per month. For many professional cleaning companies this means completing more jobs, increasing revenue and drastically cutting downtime. When workload justifies it, the tethered setup pays for itself in a few weeks.
- Up to 12 hours of uninterrupted work
- Recover up to 28 operating hours per month
- Zero battery swaps (up to 12 a day avoided)
- Zero battery cycle and wear costs
- Uniform cleaning pressure throughout the session
- More jobs completed, more revenue
Six elements
for a complete system
The Drone Cleaning System is an integrated solution designed for real-world sites: an industrial petrol pump for continuous use with no dependence on mains power, a motorised electric hose reel to manage the 150 m of HP hose during flight, a remotely tilting lance, and live visual control with a dual camera. All components are included in the DCS Starter.
220 bar pressure washer
Industrial petrol pump with a flow rate up to 660 l/h. High-efficiency 6.5 hp 4-stroke engine, designed for continuous on-site use without interruptions. Total independence from mains power: operation anywhere.
150 m electric hose reel
Motorised reel for 150 metres of HP hose. Automatic hose-tension management during flight, with a wireless remote for unwinding and retraction. Maximum drone manoeuvrability without compromising pressure.
Nozzles & accessories
Complete set of interchangeable ¼" nozzles: 0°, 15°, 25°, 45°, 65°, foam, plus a 360° rotary turbo nozzle for stubborn dirt. High- and low-pressure hoses and fittings, adapter set and DJI Matrice 400 propeller guard set. Compatible with osmotic water, detergents and biocides.
Remotely tilting lance
Spray angle adjustable from +10° to -50° with real-time remote control. Dynamic adjustment during flight to cover vertical and inclined façades, overhangs and complex geometries without repositioning the drone.
Live View 2× Full HD + laser
Dual Full HD camera with a laser sensor for distance from the surface. The pilot sees the scene from the drone's perspective and has a real-time distance reading to fine-tune pressure and angle. Everything monitored from the ground in complete safety.
Tethered System (DCS Unlimited)
Exclusive to the DCS Unlimited: continuous power from the ground via cable, virtually unlimited flight endurance. Eliminates battery cycles, reduces the risk of human error in battery swaps, and ensures uniform pressure throughout the entire operating session.
Which configuration is right for your site?
A certified contact
from quote to after-sales
DJI Gold 5 Dealer, ISO 9001:2015 certified. Every DroneBase client has an exclusively assigned technical consultant: a single point of contact from the initial site assessment, through operational onboarding, all the way to ongoing support. Six service areas covered, all included in the package.
Certified technical consulting
Analysis of your operating context, surface types and expected job frequency. Documented technical assessment with the optimal configuration (Starter / Professional / Unlimited) and an investment payback plan based on your sites.
On-site operational onboarding
Complete system setup at our Rimini premises: hardware configuration, calibration, first operating session with your team, parameter checks and adjustments. All documented with a start-up report and 4-hour private operational training (included in the DCS Professional and Unlimited).
EU-STS-01 licence & ENAC
Full support with regulatory paperwork: EASA theory-and-practice course, EU-STS-01 certification for standard operations, drone registration with ENAC, D-Flight registration and assistance in taking out the mandatory liability policy. Fully compliant from the very first site.
24/7 technical support
A direct line to your technical contact for any on-site need. Guaranteed remote diagnostics, firmware updates, optimisation of pressure and angle parameters for your surface type. On-site intervention scheduled within 48 h.
MEPA & public sector supply
Available on MEPA for public administrations, municipalities, heritage authorities, public-asset managers and territorial consortia. Support with public-tender documentation and framework contracts for scheduled multi-building maintenance.
Continuous dedicated contact
Your consultant stays the same over time. Hardware upgrades, ENAC renewals, training for new operators, configuration upgrades (Starter → Professional → Unlimited): a single certified point of contact with no expiry.
Hardware, software, compliance
from a single supplier
The Drone Cleaning System is an integrated system supplied complete: DJI Matrice 400 drone, DroneBase cleaning system designed in Italy, industrial pump and hose reel, optional tethered system, EASA/ENAC regulatory support. A single ISO 9001:2015 certified supplier for hardware, training, maintenance and spare parts.
DJI Matrice 400 / 350
220 bar pump 660 l/h
150 m hose reel
Tethered System
EU-STS-01 · ENAC
Eight scenarios
where the economics change
The system is in production at cleaning companies, real-estate asset managers, photovoltaic and wind maintenance firms, cultural institutions and marine operators. From façade and glass cleaning to drone cleaning of photovoltaic panels, eight applications where traditional methods cost dearly in time, safety and impact on building activities.
Iper Ammortamento
+ Nuova Sabatini
The Drone Cleaning System is a fully interconnectable Industry 4.0 asset: DJI Matrice 400 hardware with integrated telemetry, a cleaning system with live sensors (distance laser, dual Full HD camera), documented job output, integrable with company management systems for scheduled maintenance. Iper Ammortamento and Nuova Sabatini can be combined on the complete system (drone + cleaning payload + tethered) — tax recovery of up to 50-60% on the investment. Industry 4.0 technical documentation included. Available via Grenke Operating Lease 24-60 months and on MEPA for public administrations, municipalities and heritage authorities.
Check the incentives for your caseFrom €11,900 + VAT
Three configurations starting from the DCS Starter (€11,900 + VAT / from €280/month) to the DCS Professional (€25,300 + VAT / from €530/month) up to the DCS Unlimited with continuous tethered endurance (€34,100 + VAT / from €720/month). Grenke Operating Lease over 24-60 months: zero deposit, 100% deductible instalment by instalment, favourable final buyout. Combinable with Iper Ammortamento and Nuova Sabatini. Available on MEPA for public administrations.
Buy Now Book Your DemoLet's talk about your site
We help you assess the Drone Cleaning System for your specific scenario: building type, heights involved, job frequency, presence of constraints (heritage authorities, activities below, accessibility). We recommend the right configuration among DCS Starter, DCS Professional and DCS Unlimited and propose the optimal tax plan (purchase / Grenke / leasing). A working demo at our Rimini premises with the drone and system live, or on location at your own real site. Fill in the form and we'll get back to you within 48 h. Or call us at +39 0541.1790411.
