DJI Matrice 400

Aerial Transport Box with Winch for DJI Matrice 400

The Aerial Transport Box with Winch is a multifunctional container in carbon fibre and aluminium alloy for the DJI Matrice 400, in the Advanced version: it integrates landing delivery, aerial drop and winch delivery over 30 metres of cable, with a payload of up to 2,5 kg at 20 m/min. It carries a two-position electronic lock hook with audio pickup, anti-tangling sensing, a limit sensor and a one-touch emergency cable cut, with an IP55 rating and operation from -25 °C to +55 °C.

Box di Trasporto Aereo con Verricello per DJI Matrice 400 - 1
Box di Trasporto Aereo con Verricello per DJI Matrice 400 - 1
Box di Trasporto Aereo con Verricello per DJI Matrice 400 - 2
Box di Trasporto Aereo con Verricello per DJI Matrice 400 - 3
Box di Trasporto Aereo con Verricello per DJI Matrice 400 - 4
Box di Trasporto Aereo con Verricello per DJI Matrice 400 - 5
Box di Trasporto Aereo con Verricello per DJI Matrice 400 - 6
Box di Trasporto Aereo con Verricello per DJI Matrice 400 - 7
3.904,00 € TAX (22%) Included
Invoicing available at check-out
Yours from 86,33 €/month with Grenke Operating Lease
VAT-FREE
Tax-Free Shopping For EU businesses registered in VIES
↗
Talk to an expert Dedicated technical consultant — Mon–Fri 9:00 AM–6:00 PM
Call
Register now → ACCESS DISCOUNTS
Register now and get exclusive discounts on all products. Reserved prices are visible only to registered users.
Access the Reserved Pricing
Aerial transport and release · DroneBaseAerial Transport Box with Winch

Multifunctional carbon-fibre container for the DJI Matrice 400, in the Advanced version: landing delivery, aerial drop and winch delivery over 30 metres of cable. Payload up to 2,5 kg, descent speed of 20 m/min, two-position electronic lock hook, emergency cable cut and anti-tangling protection. IP55 rating and operation from -25 °C to +55 °C.

30 mWinch Cable 2,5 kgMaximum Payload 20 m/minCable Speed IP55Protection Rating
ProductThree ways to deliver a load, in a single container

The Aerial Transport Box with Winch is a multifunctional container in carbon fibre and aluminium alloy, designed for low-altitude aerial transport with the DJI Matrice 400. In the Advanced version it integrates all three delivery methods: point-to-point landing delivery, aerial drop and winch delivery. The three can be combined freely, so one aircraft covers scenarios that would normally call for different equipment.

The body measures 336 × 432 × 355 mm and weighs 1950 grams within a 10 gram tolerance, excluding the winch system, which adds 455 grams in a unit of 143 × 120 × 58 mm. Power draw is modest: no more than 40 W for the container and 30 W for the winch, both running on 13,6-24 V direct current. Integration with the aircraft is through an E-Port V2 interface for the box and DJI SkyPort, E-Port V2 or OSDK for the winch.

The winch lowers up to 2,5 kg over 30 metres of cable at 20 metres per minute, accurate to 0,2 m/min. The load releases in three ways — on ground contact, electronically or manually — and control is one-touch, with tap raise and lower from the remote controller. Actual payload remains subject to the aircraft’s own carrying capacity.

Safety rests on three distinct elements. An active sensing algorithm monitors cable entanglement risk in real time, while a dedicated mechanism guides the cable path during lifting and lowering. A limit sensor controls travel. And for complex scenarios a one-touch emergency cable cut is available, freeing the aircraft in critical conditions. The electronic lock hook, with two hook positions, carries a 700 mAh battery for one to two hours of runtime and an audio pickup system that, paired with a loudspeaker, enables air-to-ground communication. With the O4 ground station the system connects to DJI FlightHub 2 and to third-party logistics platforms, for routine operation with real-time monitoring, task scheduling and statistical analysis. Supplied by DroneBase, ISO 9001:2015 certified company, with use-case assessment, installation, commissioning, operator training and specialised technical support.

Delivery methodsHow the load reaches the ground

The Advanced version integrates all three methods, freely combinable within the same mission.

Landing deliveryPoint-to-point transport with the aircraft landing: the base method, available on every version
Aerial dropReleasing the load in flight without landing: useful where the ground will not take the aircraft
Winch deliveryUp to 2,5 kg lowered over 30 metres of cable at 20 m/min, with the aircraft hovering at a safe altitude
Electronic lock hookTwo hook positions, remote control, 700 mAh battery with one to two hours of runtime
One-touch controlTap raise and lower from the remote controller, in manual or semi-automatic mode
Three ways to releaseOn ground contact, electronically from the controller or manually on site: chosen to suit the scenario
SafetyWhat stops a delivery becoming a problem

A cable tangling beneath a hovering aircraft is the main risk in this kind of operation: here it is addressed on three levels.

Anti-tangling sensing
Active algorithm monitoring cable entanglement risk in real time
Guided automatic winding
A dedicated mechanism organises and constrains the cable path during lifting and lowering
Limit sensor
Controls cable travel and prevents running beyond the limit
Emergency cable cut
One-touch function that frees the aircraft in critical situations
IP55 rating
Operation from -25 °C to +55 °C, storage from -45 °C to +70 °C
Integrated with the aircraft
The container is designed to reduce flight and obstacle-avoidance risks compared with an external load
Integration and connectivityFrom the single flight to routine operation
E-Port V2 interface
Electrical connection of the container to the aircraft
DJI SkyPort, E-Port V2 and OSDK
Electrical interfaces available for the winch unit
O4 ground station
Enables the system to connect to management platforms
DJI FlightHub 2
Remote operation, real-time monitoring, task scheduling and statistical analysis
Third-party logistics platforms
Connection to external management systems for routine aerial transport
Audio pickup
Built into the electronic lock hook: paired with a loudspeaker it enables air-to-ground communication
Technical specificationsFull technical specifications
CONTAINER
Dimensions336 × 432 × 355 mm
Weight1950 g ± 10 g, excluding the winch system
MaterialCarbon fibre and aluminium alloy
Power draw≤ 40 W
InputDC 13,6-24 V, 4 A
Electrical interfaceE-Port V2
WINCH UNIT
Dimensions143 × 120 × 58 mm
Weight455 g ± 5 g
MaterialAluminium alloy and carbon fibre
Power draw≤ 30 W
InputDC 13,6-24 V, 4 A
Electrical interfacesDJI SkyPort, E-Port V2, OSDK
WINCH PERFORMANCE
Cable length30 m
Speed20 ± 0,2 m/min
Payload≤ 2,5 kg, subject to the aircraft’s payload capacity
Control rangeSame as the aircraft’s communication link
Electronic releaseSupported
Unlock modesGround contact, electronic, manual
Anti-tanglingGuided automatic winding
Limit sensorFitted
Operating modesManual and semi-automatic
Delivery controlOne-touch, tap raise and lower
Emergency measureOne-touch cable cut
ELECTRONIC LOCK HOOK
Dimensions81 × 44 × 35 mm
Weight85 g ± 5 g
Hook positionsTwo
Battery700 mAh
Runtime1-2 hours
MaterialNylon and stainless steel
Charging5 V / 2 A
ENVIRONMENT AND COMPATIBILITY
Protection ratingIP55
Operating temperature-25 °C to +55 °C
Storage temperature-45 °C to +70 °C
Compatible aircraftDJI Matrice 400
Who it is forApplication sectors
Last-mile logisticsDeliveries to points that are hard to reach by road, with scheduling and tracking from management platforms
Rescue and civil protectionSupplies lowered over 30 metres without the aircraft landing, where the ground will not allow it
Construction and infrastructureDelivering tools and spares at height or across sites that vehicles cannot reach
Remote and island locationsRecurring links to places where road or sea transport takes longer than the urgency allows
Energy and plantCarrying components to platforms, pylons and installations where access would need heavy equipment
Aerial transport operatorsTeams building a recurring service that needs scheduling, monitoring and operating data
Frequently asked questionsFAQ
Which aircraft does it fit?
Stated compatibility is the DJI Matrice 400. Connection is through an E-Port V2 interface for the container and DJI SkyPort, E-Port V2 or OSDK for the winch unit.
What is the difference between the three versions?
The Basic version performs point-to-point landing delivery. The Standard adds aerial drop. The Advanced, which is this one, also integrates winch delivery: all three methods on the same container.
How much can the winch lower?
Up to 2,5 kg, with the limit still subject to the aircraft’s payload capacity. Descent runs at 20 metres per minute over 30 metres of cable.
How is the load released?
In three ways: automatically on ground contact, electronically from the remote controller, or manually by someone on site. The choice depends on the scenario and on whether anyone is present at the delivery point.
What happens if the cable tangles?
The system works on three levels: an active algorithm monitors entanglement risk in real time, a dedicated mechanism guides and constrains the cable path during manoeuvres, and a limit sensor controls travel. In a critical case, the one-touch emergency cable cut is available.
How much does the complete system weigh?
The container weighs 1950 grams excluding the winch, which adds 455. The electronic lock hook weighs 85 grams. The system’s weight must be subtracted from the aircraft’s carrying capacity to work out the payload actually transportable.
Can it be used for recurring operations?
Yes. With the O4 ground station the system connects to DJI FlightHub 2 and to third-party logistics platforms, with remote operation, real-time monitoring, task scheduling and statistical analysis.
What temperatures does it handle?
Operation is stated from -25 °C to +55 °C and storage from -45 °C to +70 °C, with an IP55 protection rating.
What support does DroneBase provide?
DroneBase supports the supply with use-case assessment, installation and commissioning, operator training, ENAC/EASA SORA and PDRA consultancy and specialised technical support.
Aerial Transport Box with Winch — Available at DroneBase

Landing delivery, aerial drop and winch delivery over 30 metres of cable · Up to 2,5 kg payload · 20 m/min · Carbon fibre · Emergency cable cut · IP55 · For the DJI Matrice 400

ISO 9001:2015Advanced versionIP55DJI Matrice 400

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Aerial Transport Box with Winch for DJI Matrice 400”

There are no reviews yet.

Why DroneBase

The partner that neverleaves you grounded.

01 — Warranty
Official DJI Warranty
12-month full warranty on original product. Certified purchase from a DJI Gold 5 dealer.
02 — Logistics
24h Express Shipping
Orders placed by 1:00 PM ship the same day. Trackable throughout Italy. Professional packaging.
03 — Support
Dedicated Technical Support
Certified consultant assigned to your account. Unlimited pre- and post-sales support.
04 — Purchase
Free 14-Day Returns
Satisfied or refunded within 14 days of delivery. No-questions-asked policy, full refund.
Tax Incentives 2026

Buy professional drones.Recover up to 60% of your investment.

In 2026, stackable tax tools are active that significantly reduce the effective cost. Available for companies, self-employed professionals and public administration.

01 — Transition 4.0 Plan
Hyper Depreciation
Enhanced tax deduction for technologically advanced capital goods. Directly reduces the IRES/IRPEF taxable base.
+180% deduction up to €2.5M
Learn how it works →
02 — Italian Law Decree 69/2013
Nuova Sabatini
Non-repayable interest contribution on financing or leasing. Reduces credit costs to nearly zero.
Non-repayable grant Active until 2029
Check requirements →
03 — Stackability
Stackable Savings
The two instruments operate on separate levels and can be combined. On a €20,000 enterprise system you can recover up to €10,000–12,000.
50–60% recovery Stackable 2026
Request a simulation →
Technical 4.0 documentation support included. DroneBase assists you with the technical appraisal and interconnection requirements needed to access Hyper Depreciation.
Tax incentive details →
Grenke Leasing
Choose the GrenkeOperating Lease!
  1. 1Add the product to your cart
  2. 2Select Operating Lease as the purchase method
  3. 3Select the monthly payment based on your preferred term (24–60 months)
  4. 4Submit your non-binding request
  5. 5Response within 48h
Discover why leasing makes sense →

Questions about this product?

Fill out the form and one of our experts will get back to you shortly.

Request Information

Option
Privacy Policy
Newsletter

Stay up to date

DJI product news, exclusive offers and tutorials from our experts.

Certified DJI Gold Dealer and ISO 9001:2015. Enterprise drone solutions for Italian professionals.

DroneBase SRL
Via San Giovenale 86
47922 Rimini — Italy
P.IVA IT04456990409 · REA RN-413198
ISO 9001:2015 Certified
DJI Gold Dealer ★★★★★
Trustpilot 4.8/5 Based on real reviews

© 2026 DroneBase SRL — All rights reserved · P.IVA IT04456990409

Visa, Mastercard, PayPal, Bank transfer, GrenkeLeasing