A 14-inch, 1500-nit external monitor that mirrors a DJI remote controller’s screen wirelessly, up to 200 metres away. The transmitter plugs into the remote controller’s HDMI port, the monitor shows the scene to whoever has to decide and, through reverse touch control, lets them act on the remote controller’s interface straight from the large screen. No cables strung between pilot and command position, no screens washed out in full sun.
| 14“IPS Screen 2560×1600 | 1500 nitBrightness | 200 mTransmission Distance | 4 hEndurance |
The system has two parts: a transmitter that plugs into the remote controller’s HDMI port, and the 14-inch monitor that receives its signal. The link is point-to-point and needs no network, router or on-site infrastructure.
In the field the problem is almost never the drone: it is that the person who has to decide cannot see what the pilot sees. An HDMI cable strung between two positions is a fragile answer, and the controller’s screen is small and, in full sun, hard to read.
The FieldLink C150 is a 14-inch wireless external monitor built for drone operations where several people need to see the same scene. A transmitter plugs into the HDMI port of the DJI remote controller and sends the signal to the monitor over a point-to-point ad hoc link: no local network, router or on-site infrastructure required. The stated transmission distance is up to 200 metres in an interference-free environment.
The screen is a 2560 × 1600 IPS panel at 1500 nit, with 100% sRGB coverage, 2000:1 static contrast, 16.7 million colours and a 60 Hz refresh rate: the combination needed to read a thermal image or a point cloud outdoors, where a tablet screen flattens out. The body is aluminium alloy, weighs 1.3 kg, measures 327.6 × 216.6 × 12.5 mm and carries an IP43 protection rating. Four built-in speakers also reproduce the source’s audio.
Reverse touch control allows the remote controller’s interface to be operated straight from the monitor: whoever is coordinating can work the app and payload functions without taking the controller out of the pilot’s hands, and the pilot keeps control of the flight at all times. The monitor has two HDMI and two Type-C ports, so the signal can carry on to a second screen or to a system already installed in a control room or aboard a vehicle. Endurance is 4 hours from a 6000 mAh battery, with PD and QC fast charging and continuous external power while in use. Compatible with DJI remote controllers that have an HDMI port, including the RC Plus and RC Pro series and DJI Enterprise controllers with a screen. Supplied by DroneBase, DJI Gold 5 Dealer certified ISO 9001:2015, with a preliminary compatibility check against the controller in use, pre- and post-sales technical support and operational training.
Which remote controllers does it work with?
How far does the link reach?
Does reverse touch control let you fly the drone from the monitor?
Does it need a network or an internet connection?
Can the signal also be sent to another screen?
How long does the battery last, and can it run on mains power?
Can it be used in the rain?
What support does DroneBase provide?
14″ IPS 2560 × 1600 screen at 1500 nit · Wireless link up to 200 m · Reverse touch on the controller’s interface · 2× HDMI and 2× Type-C · 6000 mAh battery, 4 hours · Aluminium alloy, IP43
★ DJI Gold 5 DealerISO 9001:2015DJI RC Plus / RC ProNo network required
There are no reviews yet.