DJI Matrice 400

Tethered DJI Matrice 400 — 4.5 kW Tethered Power System with 4K Video

Tethered power system for the DJI Matrice 400: the energy stays on the ground and travels up the cable, for continuous 24/7 flight with no battery changes.

  • 4.5 kW output power, 800 V DC output
  • 110 m cable, extendable to 200 m: altitude up to 190 m
  • Video up to 4K over the cable, with HDMI and Ethernet outputs on the ground
  • Transmission independent of the drone's radio link
  • 5.5" display with real-time parameters and control from the DJI remote
  • Automatic cable tension control and residual cable detection
  • Station up to 13 kg including the cable, IP44, -20°C to +50°C
  • LED matrix lighting system available as an accessory
Tethered DJI Matrice 400 — Sistema di Alimentazione via Cavo 4,5 kW con Video 4K - 1
Tethered DJI Matrice 400 — Sistema di Alimentazione via Cavo 4,5 kW con Video 4K - 1
Tethered DJI Matrice 400 — Sistema di Alimentazione via Cavo 4,5 kW con Video 4K - 2
Tethered DJI Matrice 400 — Sistema di Alimentazione via Cavo 4,5 kW con Video 4K - 3
Tethered DJI Matrice 400 — Sistema di Alimentazione via Cavo 4,5 kW con Video 4K - 4
Tethered DJI Matrice 400 — Sistema di Alimentazione via Cavo 4,5 kW con Video 4K - 5
Tethered DJI Matrice 400 — Sistema di Alimentazione via Cavo 4,5 kW con Video 4K - 6
Tethered DJI Matrice 400 — Sistema di Alimentazione via Cavo 4,5 kW con Video 4K - 7
Tethered DJI Matrice 400 — Sistema di Alimentazione via Cavo 4,5 kW con Video 4K - 8
11.900,00 € TAX (22%) Included
Invoicing available at check-out
Yours from 263,16 €/month with Grenke Operating Lease
VAT-FREE
Tax-Free Shopping For EU businesses registered in VIES
↗
Talk to an expert Dedicated technical consultant — Mon–Fri 9:00 AM–6:00 PM
Call
Register now → ACCESS DISCOUNTS
Register now and get exclusive discounts on all products. Reserved prices are visible only to registered users.
Access the Reserved Pricing
Tethered power · DroneBaseTethered DJI Matrice 400

Tethered power system for the DJI Matrice 400: the ground station converts mains power into high-voltage DC and sends it up to the airborne unit, sustaining propulsion and payload for continuous flight with no battery limit. Output power of 4.5 kW, a 110 m cable extendable to 200 m, and video transmission to the ground over the same cable, independent of the radio link.

4.5 kWOutput Power 200 mMaximum Cable 24/7Continuous Flight IP44Protection Rating
How it worksFrom the mains socket to continuous flight

The principle is simple: the energy stays on the ground and travels up the cable. What changes is how the work is done, because the constraint that governs every battery mission — time — disappears.

Step 01Mains power inThe station takes 176–264 V AC at 50/60 Hz from mains or a generator and converts it to 800 V DC, with an internal backup battery covering supply switchovers
Step 02Transmission along the cableThe 110 m cable, extendable to 200 m, weighs 1.25 kg per 100 m and has a tensile strength above 50 kg. Tension control is automatic, with selectable levels
Step 03Conversion on boardThe airborne unit, under 2 kg, brings the voltage back to 50 V and delivers a rated 4000 W to aircraft and payload. It fits the Matrice 400’s quick-release bracket
Step 04Control from the remoteFrom the DJI remote controller you switch on the high voltage, read real-time parameters, operate the lights and recall the cable, with no second position needed
Why choose itKey benefits

A battery drone on a night surveillance task gives twenty minutes of flight and ten of battery swap, repeated all night. Tethering changes the arithmetic: one climb, no landings, nobody tied up rotating batteries.

Continuous 24/7 flightAs long as there is power on the ground the aircraft stays up: no battery rotation, no gaps in coverage, no operator dedicated to swapping packs
4.5 kW availableGround power is not a budget to be rationed: it feeds propulsion and high-draw payloads, including lighting systems no battery could sustain
4K video over the cableThe video stream comes down the tether and is taken off over HDMI or Ethernet: quality does not depend on how congested the site’s radio environment is
5.5-inch display on the stationA 1920 × 1080 screen showing altitude, cable paid out, voltages, temperature and power draw: system state is read without opening the app
Built for the fieldA station under 13 kg with the cable on board, IP44 protection, a -20°C to +50°C operating range, operation up to 4000 m and a grounding rod supplied
Managed cable tensionTension control offers an automatic mode plus two fixed levels: the cable stays taut without tugging at the aircraft, with residual cable detection
Video transmissionVideo comes down the cable, not over the air

This is what separates the system from a plain tethered power supply. The tether does not only carry energy upward: it brings the aircraft’s video stream back down, on a dedicated bandwidth that shares nothing with the drone’s radio link.

Resolution up to 4KTransmission over the cable sustains the high-resolution stream stated by the manufacturer, with 100 Mbit/s of bandwidth dedicated to video
HDMI and Ethernet outputsAt the ground station the signal is taken off over HDMI for a monitor or video wall, and over Ethernet for the control room network or onward streaming
Independent of the radio linkIn radio-congested areas, or where wireless transmission is restricted, the video still gets through: it travels on a conductor, not through the air
Type-C input on boardThe airborne unit takes the payload’s signal over a Type-C interface and feeds it into the tether: no extra transmitter to power and manage
Airborne unitThe heart of the system, on board the aircraft

The airborne unit takes the high voltage from the cable, brings it back to 50 V and distributes it. It is more than a converter: it is where the system makes the power coming up from the ground available, through dedicated ports sized for lighting loads.

190 × 155 × 86 mmMain body dimensions, connectors excluded. A compact volume for a unit handling a rated 4000 W on board
Up to 2 kgMain body weight, excluding mounting hardware: it enters the mass budget alongside the payload, but leaves useful margin on the Matrice 400
Y-plate quick releaseThe slider engages the bracket already fixed to the aircraft’s underside and clicks home: mounting and removal without tools on every mission
4000 W at 50 VRated output to aircraft and payload. Conversion from 800 V happens on board, so current on the cable stays low and the tether stays light
IP44, up to 4000 mOperating range -20°C to +50°C and storage -40°C to +70°C: the unit stays exposed to the weather for the whole mission
Type-C video inputThe payload’s signal enters here and is fed into the tether: no extra transmitter to power, configure and account for in the mass budget
ConnectivityThe airborne unit’s ports

All connections are grouped on the rear face of the unit. This is where the system’s real lighting capability can be read: 1600 W combined across the two matrix ports, plus 300 W dedicated to the gimbal light, on top of what aircraft and payload require.

Tether connector
Aviation-style push-and-lock fitting for the cable from the ground station
Matrix light port 1
50 V, up to 800 W
Matrix light port 2
50 V, up to 800 W
Gimbal light port
50 V, up to 300 W
Type-C video input
From the payload into the tether
Power cable
Connection to the aircraft’s power port

The ports are protected by sealed covers, and the body is drilled for the retaining straps that secure the wiring along the landing gear bars.

The productTethered DJI Matrice 400: unlimited power and video over the cable

The Tethered DJI Matrice 400 is a tethered power system designed specifically for the DJI Matrice 400. The ground station draws current from mains or a generator at 176–264 V AC, converts it to 800 V DC and sends it along the cable to the airborne unit, which brings it back to 50 V and delivers a rated 4000 W to aircraft and payload. Output power available at the station is 4.5 kW.

The operational result is continuous flight: as long as there is power on the ground the aircraft stays up, with no landings to change batteries and no gaps in surveillance coverage. The supplied cable is 110 metres long, extendable to 200 metres as an option, weighs 1.25 kg per 100 metres and has a tensile strength above 50 kg. Recommended altitude is 100 metres with the 110 m cable and 190 metres with the 200 m cable. Cable tension control offers an automatic mode and two fixed levels, with residual cable detection.

The tether carries more than energy. The aircraft’s video stream comes down the same cable, with 100 Mbit/s of dedicated bandwidth and HDMI and Ethernet outputs on the station: the signal reaches the monitor or the control room network without depending on radio conditions at the site. The airborne unit takes the video from the payload over a Type-C interface. Management runs from the DJI remote controller, where the high voltage is switched on, real-time parameters are read, the lights are operated and cable recovery is called, or from the station’s 5.5-inch 1920 × 1080 display. The station weighs under 13 kg with 110 metres of cable on board, carries an IP44 protection rating, operates from -20°C to +50°C up to 4000 metres, and integrates a backup battery, a 65 W Type-C port with PD 3.0 and QC, a speaker and a grounding rod. Supplied by DroneBase, DJI Gold 5 Dealer certified ISO 9001:2015, with installation, commissioning, operational training and ENAC/EASA consultancy.

Dedicated accessoryLED matrix lighting system

This is the accessory that on its own justifies moving to a tethered platform. Through the two matrix ports on the airborne unit the system makes 1600 W combined available for lighting, plus 300 W dedicated to the gimbal light: a draw no on-board battery could sustain for more than a few minutes, and which — with energy coming up from the ground — stays available all night long.

1600 W for lightingTwo matrix ports rated 800 W each on the airborne unit, plus a 300 W port for the gimbal light: the available power of a lighting tower, suspended over the point that needs it
DJI Matrix LightThe system uses DJI Matrix Light matrix floodlights, model MJL-02: 50 V supply and a maximum draw of 300 W per unit, with CE, FCC and RoHS markings
Twelve LEDs per unitEach unit is built from two side-by-side light bodies of six LEDs each, mounted on a bridge bracket that keeps them aligned and coplanar
Quick-release clampsThe brackets clamp onto the landing gear’s vertical bars with lever clamps: fitted and removed without tools, carried only on the missions that need them
Brightness in 10% stepsAdjustment in 10% steps from 0 to 100%, from the remote controller or the ground station panel: the light is set to the task without dazzling the crew below
Altitude-based automatic logicBefore take-off brightness is capped at 10% for safety; at 10 metres the floodlights switch on automatically, above 10 metres they rise to 80% and return to 100% while hovering
Technical specificationsFull technical specifications
GROUND STATION
Dimensions415 × 345 × 254 mm, including handle and foot stands
WeightUp to 13 kg, including the 110 m cable
Input voltage176–264 V AC, 50/60 Hz
Output voltage800 V DC
Output power4.5 kW
Backup battery2600 mAh, 22.2 V
Type-C portFast charging up to 65 W, PD 3.0 and QC protocols
Display5.5 inches, 1920 × 1080
Speaker10 W
Protection ratingIP44
Operating altitudeUp to 4000 m
Operating temperature-20°C / +50°C, without direct solar radiation
Storage temperature-40°C / +70°C
VIDEO TRANSMISSION
Dedicated bandwidth100 Mbit/s
Supported resolutionUp to 4K, manufacturer’s stated figure
Ground video outputsHDMI, Ethernet
Airborne video inputType-C
TETHER CABLE
Length110 m supplied, up to 200 m optional
Current capacity5 A
Voltage rating2000 V DC
Weight1.25 kg per 100 m
Tensile strengthAbove 50 kg
Recommended altitude100 m with the 110 m cable · 190 m with the 200 m cable
Tension controlAutomatic, plus two fixed levels; can be switched off
Residual cable detectionSupported, resettable from the panel
AIRBORNE UNIT
Dimensions190 × 155 × 86 mm, main body excluding connectors
WeightUp to 2 kg, main body excluding mounting hardware
Rated output power4000 W
Output voltage50 V
InstallationY-slider quick-release bracket on the DJI Matrice 400
Matrix light portsTwo ports, 50 V, up to 800 W each
Gimbal light port50 V, up to 300 W
Power available for lightingUp to 1600 W across the two matrix ports, plus 300 W on the gimbal port
Protection ratingIP44
Operating altitudeUp to 4000 m
Operating temperature-20°C / +50°C
Storage temperature-40°C / +70°C
LIGHTING SYSTEM — ACCESSORY
TypeDJI Matrix Light LED matrix floodlights, model MJL-02
Supply50 V from the airborne unit’s dedicated ports
Maximum draw per unit300 W
LEDs per unitTwelve, on two side-by-side light bodies
Total power availableUp to 1600 W across the airborne unit’s two matrix ports, plus 300 W on the gimbal port
MarkingsCE, FCC, RoHS
MountingLever clamp on the landing gear bars, quick-release
AdjustmentIn 10% steps, from 0 to 100%
Pre-take-off limitMaximum intensity 10%
Automatic logicOn at 10% at 10 m altitude, 80% above 10 m, 100% while hovering
MANAGEMENT AND DIAGNOSTICS
ControlDJI remote controller through a dedicated module, station panel
Real-time parametersAltitude, cable paid out, input voltage, ground-side and aircraft-side voltage, temperature, power draw
Flight recordsDate, duration, distance and maximum altitude, with sorting and query
Firmware upgradeFrom the system or a local file, not permitted in flight
Log exportTo a USB drive from internal storage
GroundingGrounding rod supplied, mandatory before use
COMPATIBILITY
AircraftDJI Matrice 400
IntegrationDedicated module in the DJI remote controller interface
Who it is forApplication sectors
Emergency lightingAn aerial light tower over road accidents, collapses and night scenes, with the area lit for the whole operation and no vehicles to position
Extended surveillanceContinuous observation of an area for hours or days, with no coverage gaps caused by battery changes
Events and public gatheringsA fixed observation point at height for the whole event, with video distributed to the control room over Ethernet
Civil protectionContinuous reconnaissance over flooded or disaster-struck areas, with an up-to-date picture always available to coordination
Construction and night workLighting extensive surfaces from above, with no light towers to transport, erect and power separately
Radio relay and telecommunicationsA communications payload held at altitude without interruption, to extend coverage across an operating area
Frequently asked questionsFAQ
How long can it stay airborne?
For as long as the ground station is powered. Energy comes from mains or a generator rather than the onboard battery, so there is no endurance limit to manage: the flight continues with no landings for battery changes. The internal backup battery covers supply switchovers; it does not replace the mains.
What altitude can it reach?
Altitude is set by cable length. With the supplied 110-metre cable the recommended altitude is 100 metres; with the optional 200-metre cable it reaches 190 metres. The margin covers cable catenary and manoeuvring.
How does the video reach the ground?
On the same cable that carries power upward. The airborne unit takes the payload’s signal over a Type-C interface and feeds it into the tether, with 100 Mbit/s of dedicated bandwidth; on the ground the signal is taken from the station over HDMI, for a monitor or video wall, or over Ethernet, for the control room network. The manufacturer states support for transmission up to 4K. The operational advantage is that the stream does not depend on radio conditions at the site.
Is the drone’s radio link still needed?
Yes. The tether carries power and video, but flight control remains on the radio link between remote controller and aircraft. The system adds a dedicated module to the remote controller interface, from which the high voltage is switched on, real-time parameters are read, the lights are operated and cable recovery is called.
Does the cable interfere with the aircraft?
The system actively controls cable tension. Automatic mode regulates tension according to flight state to keep the tether taut without tugging, and as alternatives two fixed levels can be set or the control switched off. Residual cable detection is also provided, resettable from the panel.
How much light does the lighting system give?
The airborne unit provides two matrix light ports rated 50 V and up to 800 W each, for 1600 W combined, plus a 300 W port for the gimbal light. The floodlights used are DJI Matrix Light units, model MJL-02, supplied at 50 V with a maximum draw of 300 W per unit: each unit is built from two light bodies of six LEDs and clamps onto the landing gear bars with lever clamps, without tools. All of that power comes up the tether, so the light stays on for the whole operation: on the onboard battery alone, a draw of that order would be unsustainable.
What precautions are needed before use?
The supplied grounding rod must be driven about 20 cm into the ground and connected before the high voltage is activated. Activation is protected by a press-and-hold with voice confirmation and a light indication, and the system runs a self-test before reporting ready. The high voltage must be switched off before disconnecting the aviation connector at the end of the mission.
What support does DroneBase provide?
DroneBase, a DJI Gold 5 Dealer and ISO 9001:2015 certified company, handles assessment of the operating scenario, installation and commissioning with your staff, operational training on using the system and ENAC/EASA consultancy on procedures for flight with a tethered aircraft.
Tethered DJI Matrice 400 — Available from DroneBase

Continuous 24/7 flight with no battery changes · 4.5 kW of power · 110 m cable, up to 200 m · Video up to 4K over the tether with HDMI and Ethernet outputs · 5.5″ display · IP44 · LED matrix lighting system available as an accessory

★ DJI Gold 5 DealerISO 9001:2015DJI Matrice 4004K video over cable

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Tethered DJI Matrice 400 — 4.5 kW Tethered Power System with 4K Video”

There are no reviews yet.

Why DroneBase

The partner that neverleaves you grounded.

01 — Warranty
Official DJI Warranty
12-month full warranty on original product. Certified purchase from a DJI Gold 5 dealer.
02 — Logistics
24h Express Shipping
Orders placed by 1:00 PM ship the same day. Trackable throughout Italy. Professional packaging.
03 — Support
Dedicated Technical Support
Certified consultant assigned to your account. Unlimited pre- and post-sales support.
04 — Purchase
Free 14-Day Returns
Satisfied or refunded within 14 days of delivery. No-questions-asked policy, full refund.
Tax Incentives 2026

Buy professional drones.Recover up to 60% of your investment.

In 2026, stackable tax tools are active that significantly reduce the effective cost. Available for companies, self-employed professionals and public administration.

01 — Transition 4.0 Plan
Hyper Depreciation
Enhanced tax deduction for technologically advanced capital goods. Directly reduces the IRES/IRPEF taxable base.
+180% deduction up to €2.5M
Learn how it works →
02 — Italian Law Decree 69/2013
Nuova Sabatini
Non-repayable interest contribution on financing or leasing. Reduces credit costs to nearly zero.
Non-repayable grant Active until 2029
Check requirements →
03 — Stackability
Stackable Savings
The two instruments operate on separate levels and can be combined. On a €20,000 enterprise system you can recover up to €10,000–12,000.
50–60% recovery Stackable 2026
Request a simulation →
Technical 4.0 documentation support included. DroneBase assists you with the technical appraisal and interconnection requirements needed to access Hyper Depreciation.
Tax incentive details →
Grenke Leasing
Choose the GrenkeOperating Lease!
  1. 1Add the product to your cart
  2. 2Select Operating Lease as the purchase method
  3. 3Select the monthly payment based on your preferred term (24–60 months)
  4. 4Submit your non-binding request
  5. 5Response within 48h
Discover why leasing makes sense →

Questions about this product?

Fill out the form and one of our experts will get back to you shortly.

Request Information

Option
Privacy Policy
Newsletter

Stay up to date

DJI product news, exclusive offers and tutorials from our experts.

Certified DJI Gold Dealer and ISO 9001:2015. Enterprise drone solutions for Italian professionals.

DroneBase SRL
Via San Giovenale 86
47922 Rimini — Italy
P.IVA IT04456990409 · REA RN-413198
ISO 9001:2015 Certified
DJI Gold Dealer ★★★★★
Trustpilot 4.8/5 Based on real reviews

© 2026 DroneBase SRL — All rights reserved · P.IVA IT04456990409

Visa, Mastercard, PayPal, Bank transfer, GrenkeLeasing