Extended flight autonomy
Matrice 400 has a forward flight time of up to 59 minutes, a hovering flight time of up to 53 minutes, and an IP55 rating .
Updated carrying capacity
Depending on the task, Matrice 400 can be equipped with the Zenmuse H30 series, L2, P1, S1 Spotlight, Manifold 3 or third-party loads.
Power line level obstacle detection
With LiDAR, mmWave radar and low-light fisheye vision sensors, Matrice 400 detects power lines in mountainous terrain, even in the dark.
Improved intelligence and efficiency
Matrice 400 increases efficiency with intelligent sensing, intelligent AR projection, real-time terrain tracking and takeoff/landing on ship.
Easier automated operations
Matrice 400 enables automated power line inspection flights with Zenmuse L2, as well as Geometric Route and Slope Route type route planning with FlightHub 2.
Comprehensive accessory upgrade
Matrice 400 works with RC Plus 2 Enterprise Enhanced, Cellular Dongle 2, TB100 Battery, TB100C Battery with cable, and BS100 Charging Station.
Extended flight autonomy
Matrice 400 has a forward flight time of up to 59 minutes, a hovering flight time of up to 53 minutes, and an IP55 rating .
Updated carrying capacity
Depending on the task, Matrice 400 can be equipped with the Zenmuse H30 series, L2, P1, S1 Spotlight, Manifold 3 or third-party loads.
Power line level obstacle detection
With LiDAR, mmWave radar and low-light fisheye vision sensors, Matrice 400 detects power lines in mountainous terrain, even in the dark.
Improved intelligence and efficiency
Matrice 400 increases efficiency with intelligent sensing, intelligent AR projection, real-time terrain tracking and takeoff/landing on ship.
Easier automated operations
Matrice 400 enables automated power line inspection flights with Zenmuse L2, as well as Geometric Route and Slope Route type route planning with FlightHub 2.
Comprehensive accessory upgrade
Matrice 400 works with RC Plus 2 Enterprise Enhanced, Cellular Dongle 2, TB100 Battery, TB100C Battery with cable, and BS100 Charging Station.
DJI Matrice 400 – Industrial drone with 59 minutes of battery life and LiDAR/mmWave sensors for critical missions
The DJI Matrice 400 (M400) is the evolution of the Enterprise platform: a modular professional drone designed for inspection, surveying and public safety. It offers up to 59 minutes of flight time, O4 Enterprise transmission range of up to 20 km (CE) / 40 km with Airborne Relay, and a 6 kg payload capacity with support for 7 simultaneous payloads.
Top flight performance
59 min autonomy with Zenmuse H30T.
Speed 25 m/s and wind resistance 12 m/s.
IP55: operation from -20 °C to +50 °C even in light rain.
All-round security
The drone combines rotating LiDAR, six-way mmWave radar and omnidirectional binocular vision to recognize cables from 2 cm to 100 m and ensure “power-line level” obstacle avoidance.
Payload and compatibility
With four E-Port V2 ports (expandable to seven with E-Port HUB), the M400 supports:
Zenmuse H30/H30T (30× zoom + thermal).
Zenmuse L2( high-densityLiDAR ).
Zenmuse P1 (45 MP full-frame sensor).
and any third-party sensor via Payload SDK.
Key applications
Infrastructure inspections (power lines, bridges, towers)
3D topographic surveys with LiDAR and photogrammetry
Public safety and search & rescue
Oil & Gas: pipeline monitoring, flare-stacks
Construction/BIM: construction progress control
FAQ – Frequently asked questions about the DJI Matrice 400
- What is the IP rating of the drone?
The Matrice 400 has IP55 certification; it is recommended to fly only in rain ≤ 100 mm/24 h. - What obstacle detection system does it use?
Integra rotating LiDAR, mmWave radar and omnidirectional binocular vision for complete coverage. - How much can it carry?
The third gimbal connector supports up to 6 kg; with the HUB, the aircraft handles 7 payloads simultaneously. - Does the M400 use one or two batteries?
It runs on a single TB100 battery; an internal capacitor keeps the systems active for 45 s during hot changeover. - What European certification does it have?
It is Class C3 according to EASA, facilitating operations in specific scenarios. - How many payload ports are available?
It has four E-Port V2s (one expandable into four more) for a total of seven connectable devices. - Does the drone support the Airborne Relay function?
Yes, it can extend the video link to a second Matrice 400 in flight. - TB100 battery charging times?
With 220 V power supply: 45 min (fast) or 110 min (quiet); with 110 V the times are 70 / 110 min. - Does the battery heat itself?
Yes, it activatesself-heating below 20°C (or 5°C at charging station) for optimal performance. - Does the M400 support 4G transmission and D-RTK 3?
Both technologies are supported through dedicated modules and external RTK stations.
1 × DJI Matrice 400
1 × Intelligent Flight Battery TB100
1 × BS100 smart battery charging station
1 × DJI RC Plus 2 Enterprise
1 × DJI RC Plus 2 Sub2G SDR Module
1 × Strap and Bracket Kit for DJI RC Plus 2
1 × Propellers 2510F for DJI Matrice 400
1 × Shock absorber for DJI Matrice 400 stabilizer
1 × Carrying Case for DJI Matrice 400
3 × Propellers for DJI Matrice 400 series
1 × Calibration cover for rotating LiDAR
1 × Front propeller cover
1 × Rear propeller cover
1 × USB-C to USB-C Data Cable
1 × WB37 Battery
2 × Rubber Cover for E-Port V2 Port
4 × Rubber Cover Screws
1 × Screws and tools
1 × Cleaning tools
1 x Free membership to our Pilots Network*
1 x 2-Hour Introductory Course – At our location**
1 x 1 Year Remote Support/Teleassistance (5 hours/10 tickets)
1 x Complete Enac Manuals
1 x Dronist’s Fee Schedule 2025 + Spreadsheet
1 x Guide: How to Fly in Red Zone Legally
1 x Guide: Compulsory Drone Insurance
1 x Shipping by express courier/pickup on site
*Becoming a part of our Pilots Network you will be able to receive Job Offers in Italy and Abroad
**Discover and learn all the advanced features to be ready to fully use your new professional tool right away.
The course is performed by our team of technicians who have been specialized in drone services for years with daily field experience.
Course structure:
- Unboxing, Activation and Firmware Update Drone, Pay Load and Accessories
- DJI Account Setup Wizard
- Drone Management with DJI Pilot 2 Flight App
- Drone Flight Safety Settings
- Proper configuration and use of the RTK system
- Settings for Automatic Flight Missions
- Free flight test and scheduled flight functions with consultant
- Verification and Control of Acquired Data
- Analysis with DJI Thermal Analysis Tool Program (for drones with thermal imaging cameras)
Details
- Location: DroneBase S.R.L. Headquarters Via San Giovenale 86, Rimini, 47923 RN (travel to be requested separately).
- Duration: about 4 hours ( depending on product and App).
- Date: to be arranged by reservation upon delivery of products.
Package Contents.
Call Us Now
for a free consultation on Hardware,
Software, and ENAC.
Book Now
your free phone consultation with our Experts.
There are no reviews yet.